BellyUp Transfer Case Skid Plate by Teraflex

If there is anyone reading this who doesn’t have a clue about what a skid plate is, it is actually a steel plate that is normally of a pretty heavy gauge that is attached to the undercarriage of vehicles in an effort to protect the parts underneath it from being damaged.  Typically, you will see these plates on off road vehicles such as Jeeps.

Skid plates generally protect parts like your steering assembly or engine.  They can also be found providing protection for the gas tank.  Skid plates are no your typical factory installed equipment because not everyone is an off road enthusiast.  Skid plates will add weight and possibly fuel costs to your rig.  Also, if they are covering any parts that need to be repaired then the work will cost more since they will first have to be removed. 

This particular skid plate – the BellyUp – gives you an extra 2 inches when compared to skid plates made by the competitors.  The reason for this is that Teraflex designed it to have a lower profile.  You gain clearance that would be equal to that which you would gain if you added tires that are 4 inches larger than what you are currently running with.  The BellyUp Transfer case skid plate is made from steel that is 3/16 of an inch thick.  This gives you protection off road that is unmatched.

Please Note

·         The kit that is made for the YJ is not all inclusive

·         If you are running with a standard assembly for the axle that has a low pinion located in the rear then there might be a need for a few modifications for this to be a viable option

·         If you are running with a short shaft then you will need to purchase and use the short shaft kit

·         Some engine and transmission configurations necessitate a lift kit in order to accommodate the BellyUp

Features at a Glance

·         Teraflex makes their BellyUp Transfer Case Skid Plate with pride right here in the USA

·         This skid plate for the transfer case comes to you complete with a warranty that is unbelievably comprehensive

·         This skid plate is available for the Jeep TJ and YJ

·         There may be a need for some modifications to your exhaust system on certain applications

·         This skid plate is only recommended to be used on Jeeps that have been given a body lift of a minimum of an inch

·         Teraflex makes this skid plate from steel that has a thickness of 3/16 of an inch

·         If you do not go off road very much then you will not need this transfer case skid plate as it will add weight to your rig